Top 9 Grizzly G0555lx Deluxe Bandsaw, 14 UK – Band Saws

As an Amazon Associate I earn from qualifying purchases.

1. DJM Direct

#ad

DJM Professional Bandsaw 195mm Throat 250W 240V

#ad
DJM Direct #ad - Power 250W Motor. Perfect for DIYers and professionals. Cutting Height of 80mm. Supplied with blade, push stick & keys.
BrandDJM Direct #ad
ManufacturerDJM Direct #ad
Part NumberDJMBAS80
ModelDJMBAS80

2. dirty pro tools

#ad

Dirty Pro Tools™ Professional Band Saw 350w Motor 190mm Cutting Width Table Saw Bandsaw Bench

#ad
dirty pro tools #ad - New professional Band Saw 350w Motor. Max cutting depth 80mm, Max cutting width 190mm. Blade length/width/thickness:1575*6. 35*03mm, supplied with 6tpi blade and BS Plug. No load speed ; 1, 400rpm table size 300 x 300mm, Table tilts to 45 No Load Speed ; 1, 400rpm.
Branddirty pro tools #ad
ManufacturerDirty Pro Tools #ad

3. Lumberjack Tools

#ad

Lumberjack Tools Lumberjack 14'' Floor Standing Professional Bandsaw with 1100W Induction Motor, Red BS340

#ad
Lumberjack Tools #ad - The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning. Maximum cutting depth – 230mm 9". When cutting thicker material the full face height of 60mm is used. Tensioning the blade correctly is made simple thanks to the features on this premium model.

The bandsaw is fitted with an LED work light on a flexible stem, so that the work area will always be well lit. A window in the top door allows the operator to confirm blade tension is correct and make an adjustment when necessary. A dust extractor is always recommended when using a bandsaw. Table size: 545mm x 515mm. Cutting speed: 800 and 370m/min. The required tension varies according to blade width. Dust falling into the base of the machine will be collected here, allowing it to be quickly and easily emptied.

After a blade change fine tuning can be carried out with the aid of a tension indicator and scale. Any angle in between can be read off the scale and locked in. The cast iron table tilts from 90 degrees to 45 degrees, and has a positive stop at both of those positions. The dust collection outlet has 3 rings which allow it to accept 3 sizes of hose, 50mm, 75mm & 100mm diameter making it compatible with any type of extraction system.
BrandLumberjack Tools #ad
ManufacturerLumberjack Tools #ad
Height172 cm (67.72 Inches)
Length72 cm (28.35 Inches)
Width90 cm (35.43 Inches)
Part NumberBS340
ModelBS340

4. Draper

#ad

Draper 28109 14 TPI Bandsaw Blade for Model MBS46A Stock No. 30736, 1638mm x 1/2" , Blue

#ad
Draper #ad - Manufactured to EU Standards. Next day Delivery. Blade width: 1/2". Display packed. For draper Bandsaws and other manufacturers similar machines. Blade length: 1638mm. Draper Guaranteed Product.
BrandDraper #ad
ManufacturerDraper #ad
Height2.5 cm (0.98 Inches)
Length28.2 cm (11.1 Inches)
Width27 cm (10.63 Inches)
Part Number28109
Model28109

5. Xcalibur Tooling

#ad

70" Bandsaw Blades for Record Power BS250PK/A BS250 Metal Wood Cutting Bandsaw Blade 1/2 inch x 14 TPI

#ad
Xcalibur Tooling #ad - 100% quality Guaranteed. The blades are welded, grounded and annealed for high performance. Don't confuse xcalibur tooling's bandsaw blades with lower quality offerings if you are ripping down logs, beams, panels or cutting delicate shapes. Xcalibur tooling bandsaw blades are made from the finest 050mm thick high carbon steel with hardened teeth. 100% quality Guaranteed. Pack of 1 Bandsaw Blade.
BrandXcalibur Tooling #ad
ManufacturerXcalibur Tooling #ad
Part Number1785MM BANDSAW BLADE

6. Scheppach

#ad

100mm Cutting Height, Scheppach 230v Bench Top Bandsaw, 195mm Throat Capacity, 3-Roller Precision Guiding, 2 Year Warranty

#ad
Scheppach #ad - The maximum cutting height of the benchtop bandsaw is 100 mm and has a 195 mm Throat. The benchtop bandsaw comes with 3-roller precision guiding above and below the table for improved accuracy and stability.

Precision ripping fence with magnifying glass, to be used at the left, as well as on the right side of the saw blade. Comes with a sturdy aluminium table that is tiltable from 0° to +45°. The upper saw blade is guided by a toothed rack, which is adjustable in height for improved performance. Comes with a 2 Year Warranty for peace of mind. Features balanced band wheels with rubber facing for improved durability.
BrandScheppach #ad
ManufacturerSCHEPPACH #ad
Height17.7 cm (6.97 Inches)
Length27.5 cm (10.83 Inches)
Weight25 kg (55.12 Pounds)
Width19.6 cm (7.72 Inches)
Part NumberBASA1_UK
ModelBASA1
Warranty2 year warranty.

7. Lumberjack

#ad

Lumberjack 10" 254mm Bandsaw Professional Floor Standing 375W Induction Motor Large Rip Fence Cast Iron Table Top Includes 10mm Blade & Circular Cutting Attachment

#ad
Lumberjack #ad - The doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning. When cutting thicker material the full face height of 60mm is used. The power is delivered by a quiet 375w induction motor with a belt drive to the bandsaw wheel. If extraction is not being used the bandsaw is fitted with an integral dust collection draw.

A compact floorstanding and woodworking bandsaw with a massive cutting capacity of 150mm 6", for a machine of this size. The b250 has three sealed bearings on the blade guard. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides.

When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. Two mounted side-on to the blade to control blade twist and keep it true. The cast iron table tilts from 90 degrees to 45 degrees and has a positive stop at both of those positions. The big capacity makes it an ideal choice for woodworkers who are short on space. The dust collection outlet has 3 rings which allow it to accept 3 sizes of hose, 50mm, 75mm & 100mm diameter making it compatible with any type of extraction system.
BrandLumberjack #ad
ManufacturerLumberjack #ad
Height140 cm (55.12 Inches)
Length58 cm (22.83 Inches)
Weight28 kg (61.73 Pounds)
Width46 cm (18.11 Inches)
Part NumberBS254
ModelBS254

8. Lumberjack Tools

#ad

Lumberjack 12" 305mm Bandsaw Professional Floor Standing 750W Induction Motor Large Rip Fence Cast Iron Table Top Includes 13mm Blade & Circular Cutting Attachment

#ad
Lumberjack Tools #ad - The fence itself can be fitted in two ways. Cutting speed: 800 and 370m/min. A dust extractor is always recommended when using a bandsaw. The dust collection outlet has 3 rings which allow it to accept 3 sizes of hose, 50mm, 75mm & 100mm diameter making it compatible with any type of extraction system.

For rip cuts the guide fence can be situated on either side of the blade, against the blade to allow clearance around the guides. Any angle in between can be read off the scale and locked in. Tensioning the blade correctly is made simple thanks to the features on this premium model. The cast iron table tilts from 90 degrees to 45 degrees, on a rack & pinion, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. A window in the top door allows the operator to confirm blade tension is correct and make an adjustment when necessary.

When cutting thin and narrow strips the fence is fitted with the small face, and has a positive stop at both of those positions. Maximum cutting depth: 165mm 61/2". When cutting thicker material the full face height of 60mm is used. The bandsaw is fitted with an LED work light on a flexible stem, so that the work area will always be well lit. After a blade change fine tuning can be carried out with the aid of a tension indicator and scale. If extraction is not being used however, the bandsaw is fitted with an integral dust collection draw.
BrandLumberjack Tools #ad
ManufacturerLumberjack Tools #ad
Height160 cm (62.99 Inches)
Length58 cm (22.83 Inches)
Weight89 kg (196.21 Pounds)
Width79 cm (31.1 Inches)
Part NumberBS305
ModelBS305

9. Dapetz

#ad

Dapetz ® 4 X 1425mm 56" Bandsaw Blades 14 TPI 6.35mm Wide X 0.35mm Thick Made from CS80 Carbon Spring Steel for Cutting Metal Plastic Wood

#ad
Dapetz #ad - The minimum radius of a curve is determined by the width of the band. Application: a bandsaw is a power saw with a long, metalworking, sharp blade consisting of a continuous band of toothed metal stretched between two or more wheels to cut material.

Advantages: it includes uniform cutting action as a result of an evenly distributed tooth load, and the ability to cut irregular or curved shapes like a jigsaw. They are used principally in woodworking, and lumbering, but may cut a variety of materials. Size: 1425 mm long - 56 inch, 6. 35mm wide x 035mm thick that are of 14tpi and Teeth / Segment Size: 1mm. Material: bandsaw blades are made from quality CS80 carbon spring steel that is thick with hardened teeth. Includes: 4 pieces of Bandsaw blades 14TPI.
BrandDapetz #ad
ManufacturerDapetz #ad
Weight0.1 kg (0.22 Pounds)
Part NumberDP00784